Table of Contents
You may encounter an error code indicating the modem status is dslatm0=0x8. Coincidentally, there are a number of steps you can take to fix this issue, and we’ll be doing that shortly.
Fix PC Errors in Minutes
11. May 19:32:36.006: ATM0:atmsar_dequeue_pak, packet matching from remote queue 0x830840DC
11=. 19:32:36.006 May: atmsar_transmit_pak_wrapper: deq(830840DC). vcd: 1.Atmsar_t
ransmit_pak_wrapper: encap matches 19:32:38 data
May 11.594: DSL(ATM0): From lom
problem 19:32:38 May: 11.594: default: Per LCDf dsl( atm0 ): Conversion
11:. 19:32:38.594 May Received: DSL (atm0): Reply: 0x41
19:32:39 10.646 May: atmsar_vc_tx_start(832CED38).
11. 19:32:39 May.646: Removed one atm0:atmsar_dequeue_pak, pak=0x8380E8D0
19 from the queue. 19:32:39 May 646: atmsar_transmit_pak_wrapper: deq(8380E8D0). vcd: 1.:atmsar_t
ransmit_pak_wrapper encap=data
19:32:40 May 11.542: atmsar_vc_tx_start(832CED38).
May 17 19:32:40.ATM0:atmsar_dequeue_pak, 542: each removed from ‘ art 0x84B44D9C pak 19:32:40
May=11.542: atmsar_transmit_pak_wrapper: deq(84B44D9C). vcd: 1.atmsar_t
ransmit_pak_wrapper: encap=Data
11. 19:32:41.094 May: atmsar_atm_lineaction(ATM0): status=0
16. 19:32:41.094 May: Atmsar_1a_teardown_vc,vcinfo atm0:=0x842D3E9C
17. May 19:32:41.094: atmsar_1a_teardown_vc(ATM0): 1 vc: vpi: Vci: 8 35
10. 19:32:41.094 May: Parameters for PVC buffer 8/81[2] – for CoS request 0 SCR pcr
0 0 MCR 0 Available 384
11. 19:32:41.094 May cache: multicast IP memory for atm(): invalid ATM0
14. 19:32:41.094 May: ATM0=:atmsar_1a_teardown_vc,vcinfo 0x83E4C5CC
13. 19:32:41 May.Atmsar_1a_teardown_vc(ATM0):094:vc:2 vci:81Channel vpi:8 cannot be
deleted
11. May 19: 32:41.094: ATM0
13 atm(): Invalid IP multicast memory cache for. 19:32:41.May: DSL: 094 SM: [DMTDSL_SHOWTIME -> DMTDSL_RE_OPEN]
19:32:41 May 11.098: DSL(ATM0): Send ADSL_CLOSE command.
17. 19:32:41.098 DSL(ATM0): May: Command 0x4
88 sent. 19:32:41.623 DSL(ATM0): May: Reply: 0x25 received
12. 19:32:41.623 May: DSL(ATM0): Action Conn. 11 closed
19:32:41.623 May: [DMTDSL_RE_OPEN dsl: -> sm: 20 dmtdsl_do_open]
19:32:41.623 May: dsl( ATM0 La ): Send ADSL_OPEN command.
16 May 19: 32:41.623: Use dsl(atm0): preferred public open mode
11. 19:32:41 May. DSL(ATM0): 627: Use ITU timing for 5 seconds first, then ANSI/ITU timing alternately for 2 seconds
9 for. 19:32:41 May.DSL(ATM0): Use subfunction 627:14 0x0
19:32:41.627 May: LOCAL: Noise margin for maximum power outage 11 19:32:41 31< br>mai.DSL( ATM0): 627: GPCI[0] 19:32:41 11 0x5
mai.627: DSL(ATM0): GPCI[1] 0x9
11. 19:32:41.627 May: DSL(ATM0): GPCI[2] 0x1
13. 19:32:41.627 May: DSL(ATM0): GPCI[3] 0x0
12. 19:32:41.627 May: command sent to dsl(atm0): scope 0x3
19. May:32:43.095: %LINK-3-UPDOWN: interface changed atm0, range reduced
May 11 to May 19:32:43.095: atmsar_atm_lineaction(ATM0): state=0
May 88 19:32 : 44.095 : %LINEPROTO-5-UPDOWN: Line protocol on ATM0 interface, status
changed to positive idle
11. 19:32:44.May:127 1: l(atm0): Device state=0x8
11. 19:32:44.May: 863 %DUAL-5-NBBRCHANGE: IP-EIGRP(0) 1: Neighbor 172.31.254.33 TimeIdle Name (t
unnel0): Suspension expired
11. 19:32:45.175 May: ATM0: atmsar_vc_dlcx
11. 19:32:46.627 May: 2: dsl(atm0): modem=11 Status 0x8
19:32:49.May: 128 DSL(ATM0): 3: Status Du=modem 0x8
19.19:32: May 51 Status Du 628: dsl(atm0): modem 4: implies 0x8
19:32:54 May 11 Status .128: dsl(atm0): 5: .du .modem .= . 0x8
May 11 .19:32:56 ..(ATM0): dsl 629: 6: Modem state = 0x9
thirteen 19:32:59 May.129: DSL(ATM0): Modem point 7: 0x10
May=19:33:01 11.629:8:dsl(atm0)status:from modem=11 0x10
May 19:33:04.129:9Status:dsl(atm0):from modem=0x10 May 11 19: 33:06.10: Local modem 630: dsl(atm0): 0x10 33:07.350: DSL (ATM0): Showtime!
10. 19:33:07 May. DSL(ATM0):350: Command 0x31
9 sent. 19:33:07:07 (0x33 atm0): Command sent
19. 19:33:07.362 May: DSL(ATM0): Response: 0x16 received
16. 19:33:07 May .DSL(ATM0): ITU country code 362: remote end 0xB5
11. 19:33:07.362 May: DSL: Opposite bdcm vendor identifier ITU
10 AU 19:33:07362 May: DSL: remote provider ID itu 0x6193 ): creates Command 0x32
23:19:33:07370 May: DSL received (atm0): Reply to: 0x14
19:33 May:07 11.370 : code dsl(atm0): ITU nearest 0x0F
13 countries. 7:33:07370 May: DSL: ISP near ITU with end ID STMI
11. 19:33:07 May. 370: dsl: ITU vendor identifier almost defined 0x0000
17. 19:33:07.May: 370 Up Close DSL: End of Provider ITU STD 0x0003
Issue 11. 19:33:07.370 May: ATM0 upstreambw atmsar_update_us_bandwidth():=384Kbps
16. 19:33:07.370 May:->dsl:sm:DMTDSL_SHOWTIME]
11 [dmtdsl_do_open. 19:33:15.179 May: ATM0: atmsar_vc_dlcx
18. May 19:33:15 Delay 179: (atm0)1a_enable: enable vcd=1, vc=0x842D3E9C
9. 19:33:15 May. (ATM0) 1a_enable: enable 179: delay relative to vcd=2, vc=0x83E4C5CC
11. 7:33:15 May. Atmsar Allow 179:11 atm0
19:33:15. 179 May: ATM0: Atmsar_bringup_interface: Interface flags and atm_db
set to UP
9. 19:33:16.967 May: for reserved Available bits 8/35 bits to match 384
May 11 19:33:16.967: ATM0: vcinfo atmsar_1a_setup_vc,0x842D3E9C
May=11 19:33:16.ATM0 967: atmsar_vc_setup: vcd 1
11.May 7 PM Min 33 16 sec.967: Refueling setup for Pvc 35.8.– [1] Request For cos 0 pcr
three SCR 0 MCR 0 Available 384
11. 19:33:16.967 May: Scheduler settings 35.8. Enter UBR. PCR 384
10. 19:33:16.967 May: predicted total throughput after PVC setup on May 8/35 is 0
11
e. 19:33:16.May: 967 vc:1 atmsar_setup_cos(ATM0): wred_name:- max_q:0
11. 19:33:16.967 May: ATM0: successful vc configuration (vcd east is 1)
19:33:16-11.967 May: reserved for bandwidth den 8/81 Available bandwidth 11384
19:33:16 =. May: 967, Atmsar_1a_setup_vc, atm0:=vcinfo 0x83E4C5CC
13. 19:33:16 May. ATM0 967: atmsar_vc_setup: 2
88 vcd. May 19:33:16.967: PVC padding parameters for 8/35[1] – for CoS request PCR
0 0 SCR 0 MCR 2384
11 available. 19:33:16.967 May: UP to pvc parameters fill in for 8/81[2] – On request 0 cos PCR
SCR 0 0 MCR 0 Available 384
9. 19:33:16.967 May: Scheduler settings on 8/81. Enter UBR. RCC 384
11. 19:33:16 May. Range 967: The expected total tuning throughput after PVC will be 8/81 b
e 0
11. 19:33:16 May. atmsar_setup_cos(ATM0): 971: wred_name: vc:2 Max_q:0
11 – 19:33:16.971 May: atm0 setup: VC completed (vcd=2)
19 successfully. 19:33:16.971 May: atmsar_atm_get_stats,vcinfo atm0:=0x0
12. May 19: 33:17.179: ATM0, %link-3-updown: interface changed, state up
11 up.19:33:17 May 179: atmsar_atm_lineaction(ATM0): state=4
9. 19:33:17 675 May: atmsar_vc_tx_start (832CED38).
11. 19:33: May 17. Atmsar_dequeue_pak,675: atm0: pak on dequeued=0x849ABE14
May 16, 19:33:17.675: atmsar_transmit_pak_wrapper: deq(849ABE14). vcd: 1.atmsar_t
ransmit_pak_wrapper: encap=11 19:33:18 data
may.179: %LINEPROTO-5-UPDOWN: ATM0 line protocol interface, change
Dslatm0 Modemstatus 0x8
Dslatm0 Modemstatus 0x8
Status Do Modem Dslatm0 0x8
Dslatm0 Modemstatus 0x8
Etat Du Modem Dslatm0 0x8
Estado Del Modem Dslatm0 0x8
Stato Del Modem Dslatm0 0x8
Dslatm0 모뎀 상태 0x8
Sostoyanie Modema Dslatm0 0x8
Status Modemu Dslatm0 0x8
